• Home
  • Brands
  • P.Audio

C15-600EL


The P.Audio C15-600EL is a high output wide bandwidth transducer. The C15-600EL is an upgraded design that features many of P.Audio's new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-600EL has been optimized for use in two way or three way sound reinforcement systems and has a rated operating range of 55Hz to 2000Hz.

The C15-600EL employs a large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The C15-600EL utilizes P.Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

The voice coil design is a bobbin wound geometry with P.Audio's rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling.

The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The C15-600EL also features a double spider configuration that further enhances system reliability and mechanical control.

The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

GENERAL SPECIFICATIONS

  Nominal diameter   381 mm/15 in
  Power rating   1200 W(AES)
  Nominal impedance   8Ω
  Sensitivity   96 dB
  Frequency range   55-2000 Hz
  Chassis type   Cast aluminum
  Magnet type   Ferrite
  Magnet weight   3.17 kg/111.8 oz
  Voice coil diameter   99.3 mm/4 in
  Coil material   CCA-R
  Former material   Glass fiber
  Cone material   Paper
  Surround material   Cloth
  Suspension   Double
  X-max   5.25 mm/0.21 in
  Gap depth   15 mm/0.59 in
  Voice coil winding width   25.5 mm/1 in
  Packing dimension WxDxH (mm)   430 x 430 x 235
  Net weight   13.2 kg/29.1 lb
  Shipping weight   14.2 kg/31.3 lb

FEATURES

  • 3.9” Large FormatVoice Coil
  • 4800 Watts Peak Power Handling
  • Active Balanced Cooling
  • Ferrite Magnetics
  • Precision Rectangular Ribbon Wire
  • Double Spider Suspension
  • Integrated Demodulation Rings
  • Die Cast Aluminum Chassis

SMALL SIGNAL PARAMETERS

  Re   5.5Ω
  Fs   51 Hz
  Mms   126.83 g/4.47 oz
  Mmd   112.45 g/3.97 oz
  Qms   7.40
  Qes   0.43
  Qts   0.41
  Vas   80.57 lt/2.85 ft3
  SD   855 cm2
  BI   22.66 Tm
  Cms   7.9e-05 m/N
  Rms   5.39 Ns/m
  Le (at 1kHz)   0.67 mH