• Home
  • Brands
  • P.Audio

TC-150N


The P Audio TC-150N is a high output wide range transducer. The TC-150N is an upgraded design that features many of P Audio's new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce high sound pressure levels at low frequencies but also exhibits an extended high frequency response that makes the TC-150N a full range device. The operating bandwidth of the TC-100 is 80Hz-14000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.

The TC-150N employs a medium format 1.79 inch (45.5mm) diameter voice coil that provides an AES rated 150 watts of continuous power handling and a full 450 watts of peak rated power handling when sufficient amplifier headroom is available.

The TC-150N utilizes P Audio's under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audio's precision round wire technology that maximizes system conversion efficiency and cooling.

The Suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.

GENERAL SPECIFICATIONS

  Nominal diameter   305 mm/12 in
  Power rating   150 W(AES)
  Nominal impedance   8Ω
  Sensitivity   99 dB
  Frequency range   80-14000 Hz
  Chassis type   Heavy Duty Steel
  Magnet type   Ferrite
  Magnet weight   49.7 oz.
  Voice coil diameter   45.5 mm/1.8 in
  Coil material   Copper Wite
  Former material   Kapton
  Cone material   Paper
  Surround material   Cloth
  X-max   1 mm
  Gap depth   8 mm
  Packing dimension WxDxH (mm)   335 x 335 x 175
  Net weight   4.26 kg / 9.37 lb
  Shipping weight   4.82 kg / 9.41 lb

SMALL SIGNAL PARAMETERS

  Re   5.89Ω
  Fs   51 Hz
  Mms   39.18 g
  Mmd   31.73 g
  Qms   14.55
  Qes   0.58
  Qts   0.56
  Vas   104.64 lt
  SD   551.5 cm2
  BI   11.30 Tm
  Cms   2.5e-04 m/N
  Rms   0.87 Ns/m
  Le (at 1kHz)   0.46 mH

TC-150N


The P Audio TC-150N is a high output wide range transducer. The TC-150N is an upgraded design that features many of P Audio's new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce high sound pressure levels at low frequencies but also exhibits an extended high frequency response that makes the TC-150N a full range device. The operating bandwidth of the TC-100 is 80Hz-14000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.

The TC-150N employs a medium format 1.79 inch (45.5mm) diameter voice coil that provides an AES rated 150 watts of continuous power handling and a full 450 watts of peak rated power handling when sufficient amplifier headroom is available.

The TC-150N utilizes P Audio's under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audio's precision round wire technology that maximizes system conversion efficiency and cooling.

The Suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.